Production Line Protection Systems
Manufacturing environments demand circuit protection that withstands thermal stress, vibration, and frequent switching cycles. Our industrial MCCB and MCB ranges are engineered for the harsh conditions found on production floors, with mechanical endurance ratings exceeding 50,000 operations.
- Motor control center integration with 63A to 630A MCCBs
- Selective coordination studies for multi-level protection
- Vibration-resistant designs tested to IEC 60068
- Rapid fault clearance to minimize production downtime
Tier III/IV Critical Power Protection
Data center operators require zero-tolerance fault management with full selective coordination. Our electronic trip unit MCCBs deliver programmable protection curves, Modbus TCP communication for DCIM integration, and cascading back-up protection that maintains upstream continuity during downstream faults.
- Electronic trip units with 12 selectable protection functions
- IEC 61850 and Modbus TCP for SCADA/DCIM integration
- Selectivity tables for full discrimination up to 50kA
- Arc flash energy limitation for PPE Level 1 practices
Distribution Board Solutions for Built Environments
Office complexes, retail centers, and hospitality venues need compact, code-compliant protection that integrates cleanly into space-constrained distribution boards. Our MCB and RCCB ranges provide personnel and equipment protection in a DIN-rail form factor that maximizes panel density.
- DIN-rail MCBs from 1A to 63A with B, C, D curves
- 30mA RCCBs for personnel shock protection per IEC 61008
- RCBO combination devices for panel space savings
- Complete CE and UL documentation for building inspections
Substation and Distribution Grid Protection
Power utilities and renewable energy installations require breakers that perform reliably across extreme operating envelopes. Our high-breaking-capacity MCCBs and air circuit breakers are designed for substation secondary protection and distributed generation interconnection points.
- Breaking capacities up to 50kA for secondary distribution
- Operating temperature range: -25 degrees C to +70 degrees C
- Type-tested assemblies per IEC 61439 for panel builders
- Renewable energy grid interconnection protection
Rail and Transit Power Protection
Transportation infrastructure operates under demanding vibration, temperature cycling, and electromagnetic interference conditions. Our circuit breakers for rail applications meet EN 50155 requirements and deliver the mechanical endurance needed for decades of reliable service in traction substations and signaling systems.
- Vibration resistance per IEC 60068-2 series
- Extended operating temperature for trackside installations
- High-endurance designs for frequent switching applications
- EMC compliance per EN 61000 series
Hazardous Area Circuit Protection
Petrochemical, oil and gas, and chemical processing environments require circuit protection devices rated for explosive atmospheres. Our ATEX and IECEx certified protection devices are designed for Zone 1 and Zone 2 classified areas, with enhanced arc containment and intrinsically safe auxiliary circuits.
- ATEX and IECEx certified for Zone 1 and Zone 2
- Enhanced arc containment for hazardous atmospheres
- IP65/IP67 enclosure ratings for outdoor installations
- Complete hazardous area documentation packages